Advertisement
Resetting the Lamp Hour Timer:
If the projector is being controlled by PSA control software via RS-232 skip to page 14.
If the projector is being controlled using IP control proceed to the next step.
- Enter the assigned address on the Web browser and log in.
- Select the Admin. Options tab.
- Press the Reset button for the lamp timer that is to be reset.
- Press the OK button when the confirmation message is displayed – the lamp timer will then be
reset to read "0" hours.
- Power up the projector from the Main menu and test the operation.
- END
JPC20118
© 2011 JVC U.S.A
13
Advertisement
