Philips Sonicare DiamondClean Frequently Asked Questions Manual page 7

Follow these instructions on how to charge your DiamondClean or DiamondClean Smart
Toothbrush with the travel case
1. Place the handle in the travel case
2. Connect a mini USB cable from the travel case to the USB adapter or a laptop
3. Some models come with a build in USB cable which is located at the bottom of your
travel case.
4. The battery indicator will start flashing white or green to indicate that your toothbrush is
charging
The battery indicator stops flashing when your toothbrush is fully charged. It can take up to 24
hours before your toothbrush is fully charged.
Charging your DiamondClean Toothbrush with the
charging pad
Follow these instructions on how to charge your DiamondClean Toothbrush on the wireless
charging pad.
1. Plug the USB cable into the wall adapter and plug into a live outlet
2. Place the handle on the raised surface of the charging pad
3. The charging pad beeps and the battery indicator will start flashing white to indicate that
your toothbrush is charging.
The battery indicator stops flashing and turns solid white when your toothbrush is fully charged.
It can take up to 12 hours before your toothbrush is fully charged.