Philips Sonicare DiamondClean Frequently Asked Questions Manual page 10

Hide thumbs Also See for Sonicare DiamondClean:

DiamondClean and DiamondClean Smart toothbrush models come with unique charging

components. These chargers are not interchangeable across the DiamondClean toothbrush

family. If a handle is put in the incorrect charger, it may appear to look as if it's charging,

but it is not. Be sure to use the charger that came with your toothbrush

See below for more detail on DiamondClean and DiamondClean Smart toothbrushes.

Charging Philips Sonicare DiamondClean and

DiamondClean Smart toothbrushes

1. Plug the chrome base charger into a live electric power outlet

2. Place the glass (or charging puck) on the chrome charging base

3. Place your Philips Sonicare DiamondClean or DiamondClean smart into the glass in an

upright position

4. The flashing light on the handle indicates that the toothbrush is charging. If the battery is

very low and the indicator does not start flashing, keep the handle in the charger for at

least 10-15 minutes to allow the toothbrush to recover

Note: It takes at least 24 hours to fully charge the battery.

Note: The DiamondClean Smart toothbrushes (in addition to a flashing battery indicator) will

also lit up on the bottom and will beep twice when placed in the glass charger.

Charging Philips Sonicare DiamondClean toothbrush using

the travel case

If you would like to charge your Philips Sonicare DiamondClean toothbrush using the travel

case, follow these easy steps:

1. Place the handle in the travel case

2. Connect the mini USB cable that came with the travel case to the USB adapter or a laptop