Adjustment Before Operation - Yamaha R-V98 Owner's Manual

ADJUSTMENT BEFORE OPERATION

Speaker balance adjustment
This procedure lets you adjust the sound output level balance between the front, center, and rear speakers using the built-in test
tone generator. With this adjustment, the sound output level heard at the listening position will be the same from each speaker.
This is important for the best performance of the digital sound field processor.
4
2
1
Set to the "
2
Select the front speakers to be used.
* If you use two front speaker systems, press both the A
and B switches.
3
BASS
0
— +
5
5
Set to the "0" position.
10
5
3
VOLUME
0
— dB
∞
" position.
SPEAKERS
A B
ON ON
OFF
OFF
TREBLE BALANCE
0 0
— +
5 L 5
5
1
4
5
Turn the DSP on, so that a DSP program name
appears on the display.
6
Select the
ENHANCED mode, so that the corresponding name is
illuminated on the display.
5 R
CENTER
MODE ENHANCED CNCT VIDEO
PRO LOGIC
SUR.
+
MONO MOVIE ROCK HALL
DELAY EFFECT
TIME ON/OFF
+
—
VOLUME
—
POWER
EFFECT
PRO LOGIC or PRO LOGIC
ENHANCED
PRO LOGIC
SUR.
6