Table of Contents
Advertisement
Quick Links
Instruction sheet for SATK50193HE 001
© Copyright 2020 Caleffi
Product range
Cod.SATK50193HE 001 recess mounted heat interface unit for low temperature heating, 40 kW
Function
The heat interface unit code SATK50193HE 001 is designed to provide low temperature heating
(25–45 °C) for floor systems with electric supply in conjunction with the high temperature of a
bathroom radiator.
Specifications
SATK50193HE 001 is designed for wall installation and comes with an insulated metal cover.
For functional and performance-related features, please refer to the instruction sheet code
78202 and technical brochure 01202 supplied with the module. The product corresponding to
SATK50193HE 001 is code SATK50103HE.
Wall-mounted heat
interface unit code
SATK50193HE 001
Electric specifications
Maximum working pressure:
Electric supply:
Maximum power consumption:
Dimensions
A
A
A
B
C
A
B
1"
1/2"
heat exchanger, heating circuit regulating temperature 25–45 °C
Recessed heat interface
SATK50103HE
B
A A A
C
D
590
150
unit code
D
E
415
H0008789
www.caleffi.com
SATK50 series
10 bar
230 V - 50 Hz
80 W
Advertisement
Table of Contents
Related Manuals for CALEFFI SATK50 Series
Summary of Contents for CALEFFI SATK50 Series
- Page 1 H0008789 www.caleffi.com Instruction sheet for SATK50193HE 001 SATK50 series © Copyright 2020 Caleffi Product range Cod.SATK50193HE 001 recess mounted heat interface unit for low temperature heating, 40 kW heat exchanger, heating circuit regulating temperature 25–45 °C Function The heat interface unit code SATK50193HE 001 is designed to provide low temperature heating (25–45 °C) for floor systems with electric supply in conjunction with the high temperature of a...
- Page 2 These instructions must be observed and applied during installation, to prevent problems from arising during fitting or normal operation. Before proceeding with installation, CAREFULLY read brochure 01212 and instruction sheet code 78202 (available on the website www.caleffi.com). You should therefore: A) Carefully measure the dimensions of heat interface unit SATK50 so that it is ideally positioned on the wall.
- Page 3 When performing the hydraulic and electrical connections, observe all the safety notes provided below WARNINGS These instructions must be read and understood before installing and servicing the device. IMPORTANT! FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN A SAFETY HAZARD! 1 The device must be installed, commissioned and maintained by qualified technical personnel in accordance with national regulations and/or relevant local requirements.
- Page 4 If a fitting needs to be tightened apply a proper tightening torque, otherwise the components may be damaged by overtightening. For the updated version of the technical documentation refer to www.caleffi.com. Caleffi S.p.A.
Need help?
Do you have a question about the SATK50 Series and is the answer not in the manual?
Questions and answers