Download Print this page

Behringer DR600 Quick Manual page 2

Digital stereo reverb effects pedal
Hide thumbs Also See for DR600:

Advertisement

Use the DC IN connection to plug in a 9 V power supply (not included).
The BATTERY COMPARTMENT is located underneath the pedal cover. To install or replace the 9 V battery
(not included), press the hinges with a ballpoint pen and remove the pedal cover. Be careful not to
scratch the unit.
The DR600 has no on/off switch. As soon as you insert the jack into the IN connector,
the DR600 begins running. When not using the DR600, remove the jack from the IN
connector. This extends the life of the battery.
The SERIAL NUMBER is located at the bottom.
2. Safety Instructions
Do not use near water, or install near heat sources. Use only authorized attachments/accessories.
Do not service product yourself. Contact our qualified servicing personnel for servicing or repairs,
especially when power supply cord or plug is damaged.
3. Limited Warranty
For the applicable warranty terms and conditions and additional information regarding
MUSIC Tribe's Limited Warranty, please see complete details online at musictri.be/warranty.
4. Specifications
In A
Connector
Impedance
Impedane mono
In B
Connector
Impedance
Out A
Connector
Impedance
Out B
Connector
Impedance
MUSIC Tribe accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph,
or statement contained herein. Technical specifications, appearances and other information are subject to change without notice. All trademarks are the property
of their respective owners. MIDAS, KLARK TEKNIK, LAB GRUPPEN, LAKE, TANNOY, TURBOSOUND, TC ELECTRONIC, TC HELICON, BEHRINGER, BUGERA and COOLAUDIO
are trademarks or registered trademarks of MUSIC Tribe Global Brands Ltd. © MUSIC Tribe Global Brands Ltd. 2018 All rights reserved.
1/4" TS
500 kΩ
250 kΩ
1/4" TS
500 kΩ
1/4" TS
1 kΩ
1/4" TS
1 kΩ
Power Supply
9 V��, 1.7 A regulated
BEHRINGER PSU-HSB ALL
U.S./Canada
120 V~, 60 Hz
China/Korea
220 V~, 50 Hz
U.K./Australia
240 V~, 50 Hz
Euope
230 V~, 50 Hz
Japan
100 V~, 50 - 60 Hz
Power connector
2 mm DC jack, negative center
Battery
9 V type 6LR61
Power consumption 130 mA
Physical/Weight
Dimensions
approx. 2 1/8 x 2 3/4 x 4 4/5"
(H x W x D)
approx. 54 x 70 x 123 mm
Weight
approx. 0.73 lbs / 0.33 kg
BEHRINGER is constantly striving to maintain the
highest professional standards. As a result of these efforts,
modifications may be made from time to time to existing
products without prior notice. Specifications and appearance
may therefore differ from those listed or shown.
DIGITAL REVERB DR600

Advertisement

loading