Using The Macro Feature - Yamaha htr-5890 Owner's Manual

Using the Macro feature

The Macro feature makes it possible to perform a series of operations with the press of a single button. For example,
when you want to play a CD, normally you would turn on the components, select the CD input, and press the play button
to start playback. The Macro feature lets you perform all of these operations simply by pressing the CD macro button.
The buttons listed as macro buttons below are factory set with macro programs. You can also program your own macros
(see page 72).
Press a macro button
CD
Macro buttons
STANDBY
SYSTEM
POWER
A
B
PHONO
TUNER
CD
MULTI CH IN
V - AUX
CBL/SAT
MD/TAPE
CD-R
DTV
VCR 1
DVR/VCR2
DVD
*1 You can turn on some components (including YAMAHA components) connected to this unit by connecting them to the AC
OUTLET(S) on the rear panel of this unit. (Power control may not be synchronized with this unit depending on the component. For
details, refer to the operating instructions for the connected component.)
*2 Playback can be started for any YAMAHA remote control-compatible MD recorder, CD player, CD recorder, DVD player, or DVD
recorder. When using macros to operate other components, you will need to program the play button on the control area of that
component (see page 68) or set a remote control code (see page 66).
*3 When TUNER is selected as the input source, this unit plays the last station received before the unit was set in the standby mode.
*4
TV POWER will operate your TV without switching the input if the remote control code for your TV is set up in the DTV or PHONO
area. If the remote control code for your TV is set up in both the DTV and PHONO areas, priority is given to signal in the DTV area.
To automatically transmit these signals in order
SYSTEM
POWER
First Second
STANDBY
SYSTEM
POWER
—
—
SYSTEM
POWER
*
( 1)
REMOTE CONTROL FEATURES
CD
(CD area)
Third
—
—
(*4)
POWER
—
TV
—
—
—
—
PHONO
—
(*3)
—
TUNER
CD
(CD area) (
MULTI CH IN —
V - AUX —
CBL/SAT —
MD/TAPE (MD/TAPE area) (
(CD-R area) (
CD-R
DTV —
VCR 1 (VCR 1 area) (
DVR/VCR2 (DVR/VCR 2 area) (
DVD
(DVD area) (
*
2)
*
2)
*
2)
*
2)
*
2)
*
2)
71