Manually Adjusting Speaker Levels - Yamaha htr-5890 Owner's Manual

Canceling the sleep timer
Press SLEEP repeatedly until "SLEEP OFF" appears in
the front panel display.
After a few seconds, "SLEEP OFF" disappears, and the
SLEEP indicator goes off.
SLEEP
y
The sleep timer setting can also be canceled by pressing
STANDBY on the remote control (or STANDBY/ON on the front
panel) to set this unit to the standby mode.

Manually adjusting speaker levels

You can adjust the output level of each speaker while
listening to a music source. This is also possible when
playing sources through the MULTI CH INPUT jacks.
Please note that this operation will override the level
adjustments made in "AUTO SETUP" (page 26),
"Speaker level" (page 57) and "Using the test tone"
(page 52).
+
TV VOL
–
A / B / C / D / E
TV MUTE TV INPUT
2
LEVEL
TITLE
TEST
RETURN
1
Set AMP/SOURCE/TV to AMP.
2
Press LEVEL repeatedly to select the
speaker you want to adjust.
Front left speaker level
FRONT L
Center speaker level
CENTER
Front right speaker level
FRONT R
Surround right speaker level
SUR.R
Surround back right speaker level
SUR.B.R
Surround back left speaker level
SUR.B.L
Surround left speaker level
SUR.L
Subwoofer level
SWFR
Presence speaker level
PRES
y
Once you press LEVEL, you can also select the speaker by
pressing k / n.
3
Press l / h to adjust the speaker output
level.
The control range is from +10 dB to –10 dB.
ADVANCED OPERATIONS
AMP
+ +
1
SOURCE
CH VOL
– – TV
MUTE
SET MENU PURE DIRECT
MENU
NIGHT
ENTER AUDIO
ON SCREEN STRAIGHT
DISPLAY
3
EFFECT
51