Connections; Before Connecting Components - Yamaha HTR-5790 Owner's Manual

Before connecting components

CAUTION
Do not connect this unit or other components to the mains
power until all connections between components are
complete.
Signal directions and cable indications
audio signal direction
video signal direction
For analog signals
left analog cables
right analog cables
For digital signals
optical cables
coaxial cables
For video signals
video cables
S-video cables
Analog jacks
You can input analog signals from audio components by
connecting audio pin cable to the analog jacks on this unit.
Connect red plugs to the right jacks and white plugs to the
left jacks.
Digital jacks
This unit has digital jacks for direct transmission of digital
signals through either coaxial or fiber optic cables. You
can use the digital jacks to input PCM, Dolby Digital and
DTS bitstreams. When you connect components to both
the COAXIAL and OPTICAL jacks, priority is given to
the input signals from the COAXIAL jack. All digital
input jacks are compatible with 96-kHz sampling digital
signals.
Note
This unit handles digital and analog signals independently. Thus
audio signals input to the analog jacks are only output to the
analog OUT (REC) jacks. Likewise audio signals input to the
digital (OPTICAL or COAXIAL) jacks are only output to the
DIGITAL OUTPUT jacks.

CONNECTIONS

Dust protection cap
Pull out the cap from the optical jack before you connect
the fiber optic cable. Do not discard the cap. When you are
not using the optical jack, be sure to put the cap back in
place. This cap protects the jack from dust.
Video jacks
This unit has three types of video jacks. Connection
depends on the availability of input jacks on your monitor.
The signals input through the VIDEO jack on this unit can
be output through the S VIDEO and COMPONENT
L
VIDEO jacks (see page 56). The signals input through the
R
S VIDEO jack can be output through the VIDEO jack
when V CONV. is set to ON (see page 56).
O
C
VIDEO jack
V
For conventional composite video signals.
S
S VIDEO jack
For S-video signals, separated into luminance (Y) and
V
V color (C) video signals to achieve high-quality color
V
reproduction.
COMPONENT VIDEO jacks
For component signals, separated into luminance (Y) and
color difference (P
picture reproduction.
Note
When signals are input through both the S VIDEO and VIDEO
jacks, signals input through the S VIDEO jack have priority.
S VIDEO
VIDEO
, P ) to provide the best quality in
B R
CONNECTIONS
COMPONENT VIDEO
P P Y
R B
15