Rear Panel - Carbest 82294 User Instruction

Modified sine wave inverter
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 12
UK
C� Vent Outlet
To decrease the temperature of the inverter�
D� USB Port: 5 V, 2�1 A
Powers and chargers USB-enabled devices�
2�2

REAR PANEL

The rear panel view shows the inverter's Cooling fan, DC Battery Terminals,
Fuse�
A� COOLING FANS/VENTILATION WINDOWS
The fans automatically operate when the internal termperature (exceeds 45° C)
of the inverter requires cooling� Always allow free air flow – do not block the
vents�
B� DC Battery Terminal
(Not relevant for inverter 82291 with car cigarette lighter plug)
Connect the inverter to battery or other power sources�
Negative(-) and Positive(+) DC terminals should be kept insulated to protect
from accidental short circuits�
a) Connect the black cable to the black post (marked –) on the back of the
inverter� Connect the other end to the negative terminal on the battery�
b) Connect the red cable to the red post (marked +) on the back of the
inverter� Connect the other end to the positive terminal on the battery�
If you connect the cables to the incorrect terminals, you will reverse the polarity
and damage the inverter�
!
PROHIBITED REVERSE POLARITY�
DAMAGE CAUSED BY REVERSE POLARITY WILL NOT BE COVERED BY
WARRANTY�
C� Fuse
Fuse was built-out, so you can change the fuse outside the inverter if your
inverter fuse was blown�
Carbest Power Inverter 82291/82292/82293/82294
14

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

822938229282291

Table of Contents