Changing The Source Name In The Display Window - Yamaha AV RECEIVER RX-V730 Owner's Manual

I,:t:lArl[l]l.,IGJ[l]A*qlt_,{l]ll.7._r:|ll];t_
You can change the name that appears in the display
window on the remote control if you want to use a
different name than the original. This is useful when you
have set the input selector buttons to control different
components.
mum Press an input selector button or _ to
select the source component you want to
rename.
The selected component name appears in the display
window.
=Ypg'_,_A=_ n=_ [ I]_`_ _E_. _
OOO
_Aux VUNEn M_/CD_
(D (D (D
C_V/CBL VCAI VCn_/OV_
(D (D (D
J;iiii;iiJi
.........i m ............
P_ Press RE-NAME by using
a ballpoint pen or similar R_
object.
[] Press A / V to select and enter a character.
Pressing v changes the character in the following
order: A to Z, a to z, 0 to 9, space, - (hyphen) and !
(slash). (Pressing A goes in the reverse order.)
[] Press < / ) to move the cursor to the next
position.
Repeat step 3 and 4 until the new name is completed.
A
v
• If you want to continue setting up codes for other components,
press TV MUTE/SELECT and repeat steps 1,3 and 4.
[] Press RE-NAME again to exit from the
renaming mode.
50