1 Speaker Set - Speaker Mode Settings; 1A Center - Center Speaker Mode - Yamaha AV RECEIVER RX-V730 Owner's Manual

I-'1-'illt_1,ti'I _
Depending on the item, press A/v to select a sub
item.
2 LFE' _''_
L,U,,'_L
SPEAKER ...... OdE:
÷ HE ¢ff:,F'HONE .... OdB
[] Press < / > repeatedly to change the setting
of the item.
A
v
2 LFELEUEL
SF'EAEER ...... E_dE:
÷
HErB, PHONE..
-i IdB
[] Press A/v repeatedly until the menu
disappears or simply press one of the DSP
program group buttons to exit SET MENU.
A
< > or [%q I%q
%/_2°_ .....
ESC] E _ ........
Memory back-up
The memory back-up circuit prevents the stored data
from being lost even if this unit is in the standby
mode. However, if the power cord is disconnected
from the AC outlet, or the power supply is cut for
more than one week, the stored data will be lost. If so,
adjust the items again.
Use this feature to select suitable output modes for your
speaker configuration.
• When 96-kHz sampling digital signals are input to this unit,
some items are not affected.
• When 6CH INPUT is selected as the input source, level
adjustments in items 1A through 1E are not affected.
• 1A CENTER (center speaker
mode)
By adding a center speaker to your speaker configuration,
this unit can provide better dialog localization for several
listeners and superior synchronization of sound and
images.
Choices:
LRG (large),
SML (small), NON (none)
LRG
Select this if you have a large center speaker. The entire
range of the center channel signal is directed to the center
speaker.
SML
Select this if you have a small center speaker. The low-
frequency signals (90 Hz and below) of the center
channel are directed to the speakers selected with "IE
BASS".
NON
Select this if you do not have a center speaker. All of the
center channel signal are directed to the main left and
right speakers.
42