Table of Contents
Advertisement
Once per year, clean any soot using brushes.
The cleaning operation must be carried out by a fl ue
specialist, who must clean the duct of any fl ue gases, the
fl ue and the chimney stack, also checking their effi ciency
and issuing a written declaration confi rming the safety of
the system. This operation must be carried out at least
once per year.
Cleaning the tank and auger
Each time the pellets are refi lled, check for the presence
of any dust/sawdust or other scraps on the bottom of the
tank. If present, remove it with the help of a vacuum cleaner.
The hand protection grille must never be removed
from its housing. Clean the bottom of the tank and
the visible part of the auger.
Cleaning the painted metal parts
Use a damp cloth to clean the painted metal parts. Never
use degreasing substances such as alcohol, thinners,
acetone, benzene, as these may irreparably damage the
paint.
08/2020 - EN
Fig. 3
Fig. 4
27
Advertisement
Table of Contents
