Indmar Standard 360 Operator's Manual page 68

SECTION SEVEN
Figure 7.6 – Sea Strainer/Flushing Device
Do not remove the cover of the Strainer Pro to
remove debris while the boat is in the water
unless the raw water inlet is equipped with a
shutoff valve (sea cock) and that valve is in
the OFF position to prevent water entering and
possibly sinking the boat.
When running the engine using the flushing
feature of the Strainer Pro, the transmission must
be in neutral. Do not exceed 1200 RPM. Monitor
the engine temperature to ensure the engine
does not run excessively hot. The temperature
must not exceed 200°F. If the engine gets hot,
reduce the engine RPM until it operates at a safe
temperature.
If your boat is so equipped it is critical to check the strainer daily
to make sure it is free of weeds and other debris from the body of
water the boat is being operated in. If the body of water has lots of
aquatic vegetation, check the strainer more often.
7-12
!
WARNING
!
CAUTION