Indmar Standard 360 Operator's Manual page 100

SECTION EIGHT
b. Indmar-Vee Through Shaft. On these models, you must
remove the plug from the rear of the V-drive to drain the
cooler.
Figure 8.11 – Indmar-Vee Through Shaft Drain Plug
General Power Package Preparation
1. Clean dirt, grime and grease from painted surfaces of the
engine and drive train.
2. Touch up painted areas of the engine and transmission.
3. Coat unpainted components (engine mounts, transmission
mounts, etc.) with Indmar Marine Waterproof Grease.
8-12
INDM-0022