NAD C 338 Quick Manual

C 338
Chromecast Built-In
IMPORTANT! Follow these installation steps to add Chromecast casting capability to your C 338 amplifier.
1
Install the Google
Home app on your
mobile device
(If not already installed)
4
Set the POWER switch to ON at
the rear panel of the amplifier
PLEASE NOTE STEP #7 applies ONLY to iOS.
7
Once the unit is
in hotspot mode,
go to the
Settings menu
PLEASE NOTE STEP #9 applies ONLY
to Android.
9
NADAmpC338...
Needs Setup
DISMISS
Select the NAD Chromecast
built-in amplifier listed and tap
Set Up Continue
2
Plug in the NAD C 338 and
connect each supplied antenna
to their corresponding
terminals on the rear panel
5
Light
Indicator
Press the front panel standby
button and wait for the power
indicator light to be a steady
Settings
Airplane Mode
Wi-Fi
Bluetooth On
Notifications
Control Center
Do Not Disturb
General
Select Wi-Fi
10
SETUP
Tap Continue to
connect to your NAD
pulsing blue
Settings Wi-Fi
Wi-Fi
NADAmpC338...
CHOOSE A NETWORK
DefaultWiFi
B45OSix
You may now select the
NAD network
Chromecast built-in
Connecting to
amplifier found
Chromecast built-in
amplifier
Your mobile device will switch to a
temporary Wi-Fi hotspot on your
CONTINUE Chromecast built-in amplifier.
Your mobile device will
now connect to your
amplifier. NAD amplifier.
3
Connect a pair of speakers to the
amplifier's corresponding right/left speaker
terminals. Double-check the speakers
before powering on the amplifier
6
Your NAD C 338 is now in
hotspot mode and ready for
Wi-Fi setup
8
Open the Google
Home app.
Tap Devices in the
top right corner of
the screen
Once your
mobile device
has successfully
connected to
the amplifier in
the Google
Successfully connected
Home app, you
to your Chromecast
built-in amplifier
will be directed
to "Play Test
Sound"
Device has
been found
PG 1