Yamaha DSP-A590 Owner's Manual page 16

TO RECORD A SOURCE TO TAPE
(OR DUB FROM TAPE TO TAPE)
1
Select the source to be recorded.
TAPE
MONITOR
VIDEO AUX
2
Play the source and then turn the VOLUME control
up to confirm the input source.
3
Set the tape deck or VCR to the recording mode.
4
If the tape deck is used for recording, you can monitor
the sounds being recorded by pressing TAPE
MONITOR.
TAPE
MONITOR
VIDEO AUX
16
TUNER CD PHONO
VCR 2 VCR 1 LD/TV
TUNER CD PHONO
VCR 2 VCR 1 LD/TV
2
1, 4
Note
DSP, VOLUME, BASS, TREBLE and BALANCE control
settings have no effect on the material being recorded.