Connections - Yamaha AX-1090 Owner's Manual

Before attempting to make any connections to or from this unit, be sure to first switch OFF the power to this unit and to any other
components to which connections are being made.
When making connections between this unit and other components, be sure all connections are made correctly, that is to say L
(left) to L, R (right) to R, "+" to "+" and "–" to "–". Also, refer to the owner's manual for each component to be connected to this
unit.
If you have YAMAHA components numbered as
sure to connect the output (or input) terminals of each component to the same-numbered terminals of this unit.
Compact disc player
(General model)
Turntable
AC OUTLETS (3 SWITCHED OUTLETS)
Use these to connect the power cords from your components
to this unit.
The power to the SWITCHED outlets is controlled by this unit's
POWER switch or the provided remote control transmitter's
POWER key. These outlets will supply power to any
component whenever this unit is turned on.
4

CONNECTIONS

1, 2, 3, etc. on the rear panel, connections can be made easily by making
Tuner
2
1
TUNER
CD
3
TAPE
COUPLER
PB
TAPE 1
MAIN
4
IN
REC
OUT
3
PRE
OUT REMOTE
TAPE
PB
CONTROL
TAPE 2
4
GND
REC
OUT
A
3
TAPE
PHONO
PB
TAPE 3
4
PHONO
REC
OUT
B
AUX
Video cassette player,
LD player, etc.
Tape deck 1
SPEAKERS
A
B
A OR B:6 MIN./SPEAKER A OR B:6 MIN./SPEAKER
A B:l2 MIN./SPEAKER A B:l2 MIN./SPEAKER
Right
Tape deck 3
: Refer to "ABOUT THE OTHER REAR PANEL PARTS" on page 5.
The maximum power (total power consumption of
components) that can be connected to the SWITCHED AC
OUTLETS is 200 watts.
Tape deck 2 Speakers A
Right
VOLTAGE SELECTOR
AC OUTLETS
SWITCHED
200W MAX. TOTAL
Left
Speakers B
Left
To AC outlet