Emerson KTM VIRGO N Series Installation, Operation And Maintenance Instructions page 18

KTM VIRGO SERIES N TRUNNION MOUNTED BALL VALVES
INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS
11.6.3 Exploded view
Series N trunnion mounted ball valve without gland
Construction: Two-piece
Type: Support plate
PARTLIST
Item No. Part name
1 Body
2 Adapter
3 Ball
4 Stem
5 Seat
6 Housing
7 ISO pad
8 Fastener (ISO pad-housing)
9 Fastener (housing-body)
10 O-ring (body seal)
11 Gasket (body seal)
12 O-ring (stem seal)
13 Gasket (stem seal)
14 O-ring (housing seal)
15 Gasket (housing seal)
16 O-ring (seat seal)
18 Stud (body-adapter)
19 Nut (body-adapter)
Item No. Part name
20 Key
21 Cap screw (key-stem)
22 Drain plug for all sizes. Vent plug for
DN 100 (NPS 4) Class 600 and above
23 Bearing (stem)
24 Thrust washer (stem)
25 Seat spring
26 Sealant fitting for DN 100 (NPS 4) Class
600 and above
27 Lifting hook for DN 80 (NPS 3) Class 1500
and above
28 Support plate
29 Bearing (support plate)
30 Thrust washer (support plate)
31 Dowels (body-housing)
32 Dowels (support plate-body/adapter)
33 Dowels (ISO pad-housing)
34 Lock washer with screw
18