Emerson KTM VIRGO N Series Installation, Operation And Maintenance Instructions page 14

KTM VIRGO SERIES N TRUNNION MOUNTED BALL VALVES
INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS
11.4.3 Exploded view
Series N trunnion mounted ball valve with gland
Construction: Two-piece
Type: Support plate
PARTLIST
Item No. Part name
1 Body
2 Adapter
3 Ball
4 Stem
5 Seat
6 Housing
7 Gland
8 Cap screw (gland-housing)
9 O-ring (body seal)
10 Gasket (body seal)
11 O-ring (stem seal)
12 Packing (stem seal)
13 O-ring (housing seal)
14 Gasket (housing seal)
15 O-ring (seat seal)
17 Stud (body-adapter)
18 Nut (body-adapter)
19 Key
Item No. Part name
20 Cap screw (key-stem)
21 Drain plug for all sizes. Vent plug for
DN 100 (NPS 4) Class 600 and above
22 Stud (body-housing)
23 Nut (body-housing)
24 Bearing (stem)
25 Thrust washer (stem)
26 Seat spring
27 Sealant fitting for DN 100 (NPS 4)
Class 600 and above
28 Lifting hook for DN 80 (NPS 3) Class 1500
and above
29 Support plate
30 Bearing (support plate)
31 Thrust washer (support plate)
32 Dowels (body-housing)
33 Dowels (support plate-body/adapter)
34 Lock washer with screw
35 Bush (stem)
14