Basic Operation - Yamaha CinemaStation TSS-15 Owner's Manual

Home theater sound system
Hide thumbs Also See for CinemaStation TSS-15:
Table of Contents

Advertisement

This section explains the basic operation.
TSS-15
NATURAL SOUND HOME THEATER SYSTEM
TSS-15
q Pro Logic
MAIN
AAC
DTS
q Digital
/SUB
MOVIE MUSIC
AUTO
1
2
3
4
5
6
7
-6
- 4
-2
0
+ 2
+ 4
+ 6
I N P U T
INPUT
1
2
3
4
NIGHT
VOLUME
MOVIE
MUSIC
SPORTS
GAME
M O D E
I N P U T
STANDBY/ON
STANDBY/ON
VOLUME
SP LEVEL
SILENT CINEMA
■ Listening to a Sound Source
1
To turn on the TSS-15, press the
[STANDBY/ON] button.
The STANDBY/ON button on the TSS-15 lights up.
2
Turn on the source component.
3
Use the remote control's INPUT buttons, or
the TSS-15's [INPUT] button to select the
input to which the component is connected.
The INPUT indicator for the selected input lights up.
4
Start playback on the component.
See the component's instruction manual for details.
Use the remote control's VOLUME Up [+] and
5
Down [–] buttons, or the TSS-15's VOLUME
control to adjust the volume.
While it's being adjusted, the volume level is shown by
the TSS-15's volume indicators for several seconds.
12

Basic Operation

■ Adjusting the Level of the Subwoofer,
Remote control
While listening to a sound source, use the SP LEVEL Up
[+] and Down [–] buttons to adjust the level of the sub-
STANDBY/ON
MODE
woofer (SW), center speaker (CENTER), or surround
speakers (SURR).
MOVIE
MUSIC
SPORTS
GAME
Notes:
• The TSS-15 supports Dolby Digital, DTS, and AAC
VOLUME
MUTE
SP LEVEL
NIGHT
• The Cinema DSP and Dolby Pro Logic II listening
SW
CENTER
SURR
TEST
DUAL MONO
• The subwoofer, center, and surround speaker levels can-
1
2
3
4
INPUT
■ Muting the TSS-15
TSS-15 WD76700
To temporarily mute the TSS-15, press the remote control's
[MUTE] button. The volume level indicators flash on the
TSS-15. To unmute the TSS-15, press the [MUTE] button
again. If you adjust the volume while the TSS-15 is muted,
or press any other button, it will be unmuted automatically.
■ Turning Off the TSS-15
To turn off the TSS-15, press the [STANBY/ON] button on
the remote control or TSS-15 to set it to Standby.
While on Standby, the TSS-15 consumes a small amount of
power so that it's able to receive commands from the
remote control.
Note:
The next time you turn on the TSS-15, the previously
selected input (1–4) and listening mode will be selected
automatically.
Center, or Surround Speakers
(general model only) digital audio with a sampling rate
of 48 kHz or less, and PCM audio up to 96 kHz.
modes cannot be used with 96 kHz PCM audio.
not be adjusted while a pair of headphones is connected.
STANDBY/ON
MODE
MOVIE
MUSIC
SPORTS
GAME
VOLUME
MUTE
SP LEVEL
NIGHT
SW
CENTER
SURR
TEST
Press the [MUTE]
button to mute the
TSS-15

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tsx-15

Table of Contents