Clas Ohlson EMP701MD Instruction Manual

IP44 Extension Lead
with Twilight Switch
Art.no 36-1058 Model EMP701MD
Please read the entire instruction manual before using the product and
then save it for future reference. We reserve the right for any errors in
text or images and any necessary changes made to technical data. In
the event of technical problems or other queries, please contact our
Customer Services.
Safety
• Always unplug the product from the wall socket before cleaning.
• Make sure that the extension lead is properly plugged into the wall
socket and that the connected load device/appliance is properly
plugged into the socket of the extension lead.
• Keep the extension lead out of children's reach.
• Never connect load devices/appliances with a combined power load
higher than 3680 W.
• Never immerse the extension lead in water or other liquid.
• Never position the extension lead where it may be splashed by
water or other liquid.
• Never try to open the housing, repair or modify the extension lead in
any way.
• The extension lead is not intended for permanent use, it is intended
for temporary use with Christmas decorations, string lights, etc.
• Plug no more than one load device/appliance into each of
the extension lead sockets, do not plug a splitter socket into either of
the sockets in order to connect multiple appliances.
• Make sure that the electrical socket that the product is plugged into
is easily accessible in case it and the connected product need to be
quickly disconnected from the mains electricity.
• Do not connect products of this type to each other.
• Do not cover the product.
Specifications
Supply voltage 230 V, 50 Hz, 16 A
Max load 3680 W
Mains lead H07RN-F, 3G 1.5 mm², 1.5 m
Timer accuracy ±2 min
IP rating IP44
UNITED KINGDOM • customer service tel: 020 8247 9300 e-mail customerservice@clasohlson.co.uk internet www.clasohlson.co.uk postal 10 – 13 Market Place, Kingston upon Thames, Surrey, KT1 1JZ
Buttons and functions
DUSK-
DAWN
1. Light Sensor
1
2. LED indicator,
lights when
2
the extension lead
is turned on.
3. Setting
selector knob
3
Assembly
Attach the ground spike to the socket housing.
Operating instructions
The various settings
OFF Always off
ON Always on
2Hrs Switches on at dusk, switches off automatically after 2 hours
4Hrs Switches on at dusk, switches off automatically after 4 hours
6Hrs Switches on at dusk, switches off automatically after 6 hours
8Hrs Switches on at dusk, switches off automatically after 8 hours
DUSK- Switches on at dusk and off at dawn
DAWN
Note:
• The extension lead has a maximum load rating of 3680 W.
• Think carefully before positioning the extension lead so that it is
not within the illumination zone of other light sources such as car
headlights.
1. Push the ground spike into the ground and make sure that
the extension lead is stable and not likely to fall over.
2. Set the extension lead to one of the settings described in
the table above.
3. Make sure that each load device/appliance is switched off before it
is plugged into the extension lead.
4. Plug the load device/appliance into the socket of the extension lead.
5. Plug the extension lead into an earthed wall socket.
6. Turn the load device/appliance on.
7. The load device/appliance will now be switched on/off in
accordance with the selected setting.
Care and maintenance
• Unplug the extension lead from the wall socket before wiping it
clean with a dry cloth.
• Whenever it is not to be used for an extended period, the extension
lead should be unplugged from the wall socket and stored in a dry,
dust-free environment, out of children's reach.
Responsible disposal
This symbol indicates that this product should not be
disposed of with general household waste. This applies
throughout the entire EU. In order to prevent any
harm to the environment or health hazards caused by
incorrect waste disposal, the product must be handed
in for recycling so that the material can be disposed of
in a responsible manner. When recycling your product,
take it to your local collection facility or contact the place
of purchase. They will ensure that the product is
disposed of in an environmentally sound manner.