Commands - 2N Indoor Touch Api Manual

4.2 Commands

4.2.1 Session Control
4.2.2 GPIO
4.2.3 2N® IP Mobile Control
4.2.4 System
4.2.1 Session Control
4.2.1.1 Login
4.2.1.2 Logout
4.2.1.1 Login
The login helps you get access to the selected HTTPS session using a username and
password. The login is Admin by default and the password is identical with the 2N
launcher configuration access password.
URL: https://<IP>/api/v1/login
HTTP method: PUT
Request body: {"login":"<username>","password":"<password>"}
Response code: 200 if everything is OK, otherwise 401,405,...
Response data: N/A
In case the solution requires the
Helios IP , you can use an unsecured login to
the Launcher settings: in the
Indoor Touch , Device / Maintenance section. Having enabled this option, you can use
the following URL for login:
https://<IP>/api/v1/login?login=Admin&password=<set_password>
Example of use:
2N TELEKOMUNIKACE a.s., www.2n.cz
®
2N Indoor Touch
®
2N
Launcher Configuration,
input/output control from
Indoor Touch . Set the parameters in
Software section or the web
2N
®
2N
27/42