Advertisement
Quick Links
Advertisement
Related Manuals for NONLINEAR LABS C15
Summary of Contents for NONLINEAR LABS C15
- Page 2 Do not use power adapters with different or unknown specifications, as this may cause electrical damage on the device! Furthermore, if an external power adapter is used, this will be at your own risk. Nonlinear Labs will not be liable to damage caused by external power adapters.
-
Page 3: Package Contents
C15 Base Unit C15 Panel Unit 2 × Power Supply Adapter and Cable 2 Mounting Brackets Printed C15 Quickstart Manual Unit Connector Cable USB Stick containing: • the Preset Collection • User Manuals, Diagrams, Tutorials The stick has a special format to be used for... -
Page 6: Mounting The Panel Unit
Setting up the C15 Mounting the Panel Unit Ensure the C15 is switched off before following the next four steps: Attach mounting brackets to Base Unit by hanging and snapping. Place Panel Unit on fixated mounting brackets. There are two pins on the... - Page 7 Now the C15 is ready to use and can be switched on. In order to disassemble the paired setup, follow this protocol by applying the described four steps in reverse manner and order. The C15 Base Unit can be used on its own as well.
- Page 8 Connecting Pedals and mapping Hardware Sources Most factory presets use a mapping as shown below. For more information on Hardware Sources and especially modulation aspects, refer to chapter 5.4 of the User Manual. Continous DP-10 Mode ! Pedals Color 1 Color 2 Pitchbend Sust Pedal...
-
Page 9: Start And Shutdown
A flickering LED indicates an irregular operation mode. It means for example the supply voltage is too low. ࠌ Ensure that the power supply is not interrupted when using the C15 (booting, performance, shutdown) in order to prevent data loss. - Page 10 Setting up a Device for the Graphical User Interface Concept The C15 is designed to be of flexible usage and interaction, requiring at least the Base Unit for connections and performance. In addition, the Panel Unit provides the Hardware User Interface and therefore access to all parameters, presets and settings.
- Page 11 Here, all relevant aspects of the Wi-Fi connection are listed: Device Name You can give a name to your C15 instrument by focussing on the device name entry and pressing enter, accessing the Rename Screen. Once the name is set, an SSID will be generated. The SSID is composed of a prefix (“NL-C15-”) and the name you just gave to...
-
Page 12: Introduction To The User Interface
Introduction to the User Interface Edit Panel PM FB Setup Preset Comb S.V.F. PM FB Setup Preset Comb S.V.F. Ring Mod Sound Store A – B Pitch Ring Mod Sound Store A – B Pitch Ring Mod Info Fine Enter Edit A –... - Page 13 Storing a Preset ➑ Pressing Store opens the Preset screen in Store mode. ➐ With the Soft Button you can choose “Append”, “Overwrite” or “Insert”, creating a new preset at the end of the list (append), behind the selected preset (insert), or overwriting the data of the selected preset (overwrite).
- Page 14 FEEDBACK MIXER Adjusting a Parameter Preset Comb S.V.F. E ects Reverb Drive Level Rate COMB FILTER CABINET Store A – B Pitch Decay AP Tune Hi Cut Drive Tilt STATE VARIABLE FILTER ECHO Edit A – B Comb Mix Cut O Reson Spread Time...
- Page 15 Assigning to Hardware Sources Macro Controls can follow movements of multiple Hardware Sources. There are eight Hardware Sources provided by the C15: four connectors for external pedals, two Ribbons, the Bender and monophonic Aftertouch. In order to assign a Hardware Source to a ➎...
- Page 16 Base Unit Functionality The Base Unit provides four operational modes which can be selected with Mode Play Mode Preset Mode press briefly press briefly Mode Edit Mode Bank Mode press and hold for a second ENVELOPE A OSCILLATOR A Attack Decay 1 BP Level...
- Page 17 Instead just copy or move it to the top directory of the USB stick.. 4. Switch off the C15 and plug the USB stick to the USB connector on the backside of the Base Unit. Then start the C15.
- Page 20 NONLINEAR LABS GmbH Helmholtzstraße 2-9 E 10587 Berlin Germany www.nonlinear-labs.de info@nonlinear-labs.de Quickstart Manual Document Version: 3.6 Date: May 11, 2020 © NONLINEAR LABS GmbH, 2020, All rights reserved.