1. Manuals
  2. Brands
  3. NONLINEAR LABS Manuals
  4. Electronic Keyboard
  5. C15
  6. Quick start manual

NONLINEAR LABS C15 Quick Start Manual

Hide thumbs Also See for C15:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual

Advertisement

Table of Contents
loading

Related Manuals for NONLINEAR LABS C15

Summary of Contents for NONLINEAR LABS C15

  • Page 2: Package Contents

    Do not use power adapters with different or unknown specifications, as this may cause electrical damage on the device! Furthermore, if an external power adapter is used, this will be at your own risk. Nonlinear Labs will not be liable to damage caused by external power adapters.

  • Page 4: Mounting The Panel Unit

    Setting up the C15 Now the C15 is ready to use and can be switched on. In order to disassemble the paired setup, follow this protocol by applying the described four steps in reverse manner and order. The C15 Base Unit can be used on its own as well.

  • Page 5: Start And Shutdown

    A flickering LED indicates an irregular operation mode. It means for example the supply Ribbons voltage is too low. ߱ Ensure that the power supply is not interrupted when using the C15 (booting, performance, shutdown) in order to prevent data loss.

  • Page 6: System Requirements

    We appreciate feedback and reports of dysfunctionalities and will try to solve problems quickly. The C15 is designed to be of flexible usage and interaction, requiring at least the Base Unit for connections and performance. In addition, the Panel Unit provides the Hardware Wi-Fi Settings User Interface and therefore access to all parameters, presets and settings.

  • Page 7: Introduction To The User Interface

    Introduction to the User Interface Storing a Preset Edit Panel FEEDBACK MIXER FLANGER FEEDBACK MIXER FLANGER PM FB Setup Preset Comb S.V.F. E ects Reverb Drive Level Rate Time Mod AP Mod Feedbk COMB FILTER CABINET GAP FILTER PM FB Setup Preset Comb...
  • Page 8 Macro Controls Macro Controls can follow movements of multiple Hardware Sources. There are eight Hardware Sources provided by the C15: four connectors for external pedals, two Ribbons, the Bender and monophonic Aftertouch. In order to assign a Hardware Source to a ➎...
  • Page 9  In Play mode, the display shows the labels of the Macro Controls to which the 4. Switch off the C15 and plug the USB stick to the USB connector on the backside of the ENVELOPE C ENVELOPE B SHAPER B...
  • Page 11 NONLINEAR LABS GmbH Helmholtzstraße 2-9 E 10587 Berlin Germany www.nonlinear-labs.de info@nonlinear-labs.de Quickstart Manual Document Version: 3.3 Date: July 01, 2019 © NONLINEAR LABS GmbH, 2019, All rights reserved.

Table of Contents