Using The Remote Control; Replacing The Batteries - Yamaha CinemaStation AVX-S30 Owner's Manual

Using the Remote Control

1
STANDBY/ON MOVIE
MUSIC SPORTS
GAME
MODE
q Pro Logic II
qDigital qVS
NIGHT DTS AUTO MOVIE MUSIC
1 2 3 4 5 6 7 8 9
-8 -6 -4 -2 0 +2 +4 +6 +8

■ Replacing the batteries

If the batteries grow old, the effective operation distance of the remote control decreases considerably. If this happens, replace the
batteries with two new ones as soon as possible.
Press
Notes
• Do not use an old battery together with new one.
• Do not use different types of batteries (for example, alkaline and manganese) together. Each type of battery has its own characteristics
even if they are similar in shape.
• If the batteries run out, immediately remove them from the remote control to prevent an explosion or acid leak.
• Dispose of the batteries according to the regional regulations.
• If a battery starts leaking, dispose of it immediately. Be careful not to let leaking battery acid come into contact with your skin or
clothing. Before inserting new batteries, wipe the compartment clean.
• Replace the batteries within two minutes to preserve the memory in the remote control.
VOLUME
2 3 4
INPUT
Within 6 m
SILENT CINEMA
(20 feet)
30˚ 30˚
Use the remote control within 6 m (20 feet) of the AV
amplifier and point it toward the remote control sensor.
Notes
• Be careful not to spill liquid on the remote control.
• Be careful not to drop the remote control.
• Do not leave the remote control in the following places:
– hot or humid places, such as near a heater or in a bathroom
– extremely cold places
– dusty places
1
Press the mark on the battery cover and
slide off the cover.
2
Insert the two new batteries (AA, R06, UM-3)
into the battery compartment.
Make sure you insert the batteries according to the
polarity markings (+ and –).
3
Close the battery cover.
PREPARATION
11