Troubleshooting; Copy The Update File To A Usb Thumb Drive; Insert The Usb Thumb Drive On The Front Panel; Enter Firmware Update Mode - Yamaha CD-N500 Firmware Update Procedure

note:
DO NOT
In case the power is accidentally cut off, the network player will restore original
firmware. Perform the update procedure from STEP 1 again.
Update is completed when "UPDATE SUCCESS", "PLEASE...", "POWER OFF!" is
displayed alternately. Then, power off.
STEP 5 Confirm updated firmware version
Power on and press the SETUP button on the remote control and select
"6 Firmware Version" using the UP/DOWN buttons. Confirm that the firmware
version has been updated.
Congratulations!
You have completed the firmware update. Your player is ready for normal use.

[ 3. Troubleshooting ]

In case error message appeared during the update and unable to power on, perform
following update procedure.
STEP 1

Copy the update file to a USB thumb drive

Unzip the downloaded file and copy to the root directory of a USB thumb drive.
Be sure to delete all other files in a USB thumb.
STEP 2

Insert the USB thumb drive on the front panel

In this step, AC power cable needs to be disconnected and power switch on the
front panel is set to STANDBY/ON.
STEP 3

Enter firmware update mode

Connect AC power cable to AC outlet, while pressing PURE DIRECT button.
"USB Upgrade" will be shown in the front panel display.
Firmware update will be started automatically.
note:
DO NOT
In case the power is accidentally cut off, perform the update procedure from STEP
1 again.
Update is completed when "UPDATE SUCCESS", "PLEASE...", "POWER OFF!" is
displayed alternately. Then, power off.
Firmware Update Procedure for CD-N500
interrupt the power or press any buttons during the update.
interrupt the power or press any buttons during the update.