Download Print this page

Yamaha CD-C600BL Owner's Manual

Owners manual.
Hide thumbs


Compact Disc Changer
Changeur Compact Disc


   Related Manuals for Yamaha CD-C600BL

   Summary of Contents for Yamaha CD-C600BL

  • Page 1

    Compact Disc Changer Changeur Compact Disc OWNER’S MANUAL MODE D’EMPLOI...

  • Page 2

    Yamaha and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or distortion –...

  • Page 3

    FCC can be determined by turning the unit “OFF” and “ON”, requirements. Modifications not expressly approved by please try to eliminate the problem by using one of the Yamaha may void your authority, granted by the FCC, to following measures: use the product.

  • Page 4

    (i.e. a room with a humidifier) to prevent condensation inside this unit, which may cause an electrical Never switch off the power if the front panel display is not pictured as shock, fire, damage to this unit, and/or personal injury.

  • Page 5: Table Of Contents

    Audio CD Data Disc • This manual is printed prior to production. Design and specifications are subject to change in part as a result of improvements, etc. In case of differences between the manual and the product, the product has priority.

  • Page 6: Introduction

    Green: iPod/USB is connected and playable files have been detected (playback ready). • The power indicator above lights up when this unit is turned on. • You can turn this unit to a standby status with STNDBY/ON on 0 CD/USB the remote control.

  • Page 7

    The number corresponding to an empty tray may light up before ADVANCED SETUP” (page 13) for details. the tray is selected. When the disc tray is closed after loading/ replacing discs, this unit searches discs starting from tray 1. K Multi-information display During the search, the tray numbers corresponding to empty trays go off.

  • Page 8: Rear Panel Connections

    By connecting the REMOTE CONTROL OUT terminal of this unit to the input terminal for remote control of the other component, you can also operate it with the system remote control. In this way, up to 6 components can be connected in series.

  • Page 9: Remote Control

    Each time you press DIMMER, the brightness level changes by 4 levels. This setting is retained even if you turn off this unit. 6 Numeric buttons Use to select directly a track on the disc or a file in the current folder. (Search backward), (Search...

  • Page 10

    Artist name Remaining time of the current • If the disc being played back has a long blank space between track tracks, you will hear no sound during disc scan. Total remaining time of the...

  • Page 11

    CONTROLS AND FUNCTIONS ■ Installing batteries in the remote control ■ Notes on batteries • Change all of the batteries if you notice that the operation range of the remote control decreases. • Use AA, R6, UM-3 batteries. • Make sure that the polarities are correct. See the illustration inside the battery compartment.

  • Page 12: Operation

    To play back an 8 cm (3 inch) CD, place it in the inner recessed area of the disc tray. Do not put a normal (12 cm (5 inch)) CD on top of an 8 cm CD. To erase all programmed tracks, press CLEAR when the playback is stopped.

  • Page 13: Playing Back Ipod/usb Device

    Connecting iPod/USB devices Notes iPod • Use the USB cable supplied with your iPod. If no USB cable is supplied, purchase one from Apple Inc. • Turn off your iPod. • Do not use a USB hub. Connect your USB device or iPod via USB cable...

  • Page 14: Disconnecting Ipod/usb Devices

    • Do not connect devices other than USB mass storage class devices: USB chargers, USB hubs, PCs, external HDD, etc. • When you insert two or more memory cards at the same time into a card reader connected to the iPod/USB port on this unit, only one of the memory cards is recognized.

  • Page 15: Additional Information

    • Elapsed time may not be displayed correctly while playing back variable bitrate contents. • Do not use a disc with tape, stickers, or paste on it. If Data Disc you use such a disc, the disc may get stuck in the...

  • Page 16

    • Use a soft-tipped pen when writing on the label side of the disc. • When a disc is not being used, remove it from this unit and store in an appropriate case. • Do not expose discs to direct sunlight, high...

  • Page 17: Using The Advanced Setup

    * : Default setting 4) Unsupported USB device is connected while in the Next time you turn on the power, the unit turns on with iPod/USB mode (iPod/USB indicator remains lit in the settings that you specified above. orange).

  • Page 18: Troubleshooting

    TROUBLESHOOTING If the unit fails to operate normally, check the following points to determine whether the problem can be corrected by the simple measures suggested. If it cannot be corrected, or if the problem is not listed in the Problems column, disconnect the power cable and contact your authorized Yamaha dealer or service center for help.

  • Page 19: Specifications

    Laser Diode Properties • Standby power consumption ........less than 0.5 W • Material..................GaAlAs • Dimensions (W × H × D) ......... 435 × 116 × 405 mm (17 1/8 × 4 5/8 × 16 in) • Wavelength ................790 nm • Laser Output ..............max. 1.23 μW* •...

  • Page 20

    © 2009 Yamaha Corporation All rights reserved. Printed in Malaysia WS19260...

This manual also for:


Comments to this Manuals

Symbols: 0
Latest comments: