Hamilton Beach Stay or Go Operation Manual page 4

can result if moving blades accidentally become
exposed.
I
f the jar should twist or rotate when the motor is
22.
switched ON ( ), switch OFF ( ) immediately and
I
tighten jar in collar or on blender base.
D
o not leave blender unattended while it is
23.
operating.
B
efore plugging cord into wall socket, turn the
24.
control to OFF ( ).
control to OFF ( ).
socket.
D
o not use appliance for other than intended
25.
purpose.
D
o not place on or near a hot gas or electric
26.
burner or in a heated oven.
4
T
o disconnect cord, turn the
T
hen remove plug from wall
Y
our plug is provided with a fuse approved
27.
ASTA B.S.
by to
replacement fuse carrier, it must be replaced
with the same colour-coded carrier with the
F
same markings.
obtained from approved service agents.
D
o not operate more than 3 minutes ON at
28.
a time.
CAUTION I
:
29.
to inadvertent resetting of the thermal cut-out,
this appliance must not be supplied through an
external switching device, such as a timer, or
connected to a circuit that is regularly switched
on and off by the utility.
I
1362. f you need a
use covers and carriers can be
n order to avoid a hazard due