Bissell CleanView ProHeat 1456G User Manual page 9

Operations
Emptying the 2-in-1 Water Tank
1. Push Power Button
Water Tank from base of machine by lifting up
on Tank Carry Handle. Carry like a bucket to a
utility sink or outside where you will dispose
of the dirty water.
2. Unlatch top of tank from bottom by lifting up
on Tank Latches on each side of tank.
3. Remove top of tank by lifting up on handle.
4. Empty dirty water from back corner of tank.
5. After each use, remove any debris on red filter
near air duct on back of base of machine while
the tank is still removed.
6. Empty hair and debris basket by sliding it
toward front of tank and lifting up. Replace
before storing/continuing to clean.
7. To continue carpet cleaning, refer back to
"Carpet Cleaning" instructions on page 8.
If cleaning is complete, refer to "Maintenance
and Care" section starting on page 11.
OFF. Remove 2-in-1
1.
3.
5.
Filter
2.
4.
6.
Hair and Debris
Basket
BISSELL.com
9