Assembly - Bissell CleanView ProHeat 1456G User Manual

Assembly

Your carpet & upholstery washer comes in four
easy-to-assemble components:
Upper Handle with Screws
Lower Base
Upper Hose Wrap
Upper Tool Holder
The only thing you will need to assemble
your cleaner is a Phillips-head screwdriver.
1. Side Upper Handle onto lower base and secure
by screwing 2 screws into marked holes on back
of lower base (screws will be taped to the
handle grip).
2. Attach upper tool holder to Upper Handle
by snapping bottom half in first, then snap in
top half.
3. Place Upper Hose/Cable Wrap onto back side
of Upper Handle and secure by screwing 1 screw
into hole at bottom of wrap.
4. Wrap hose around Lower and Upper Hose/
Cable Wraps and secure it by inserting trigger
on hose grip into opening on hose grip holder
located on Upper Hose/Cable Wrap.
NOTE: Make sure to wrap hose beginning
from back of bottom Lower Hose/Cable Wrap
and then wrapping over and around top of
Upper Hose/Cable Wrap.
5. Wrap cable around Lower and Upper Hose/
Cable Wraps and secure plug to cable with clip
on plug.
6. Attach Cleaning Tools as necessary to
storage locations on upper tool holder,
Lower Hose/Cable Wrap and end of hose grip.
Carpet & upholstery washer assembly is now
complete.
WARNING
Do not plug in your machine until you are familiar with all
instructions and operating procedures.
1.
2.
3.
4.
BISSELL.com
5