Sapling Gracie swinging crib Assembly Instructions page 3

Assembly instructions
Figure 1
Stage 3 assembling of the crib body
Place 1 x crib end (part 2) on the floor with the screw inserts holes
facing upwards. Loosely attach 2 x crib sides (part 7) to the crib end
(part 2) using 4 x large bolts (part A). Making sure the grooves on the
sides are inside and at the bottom. Attach 1 x crib base support end
(part 9) to the mattress base (part 8) gently slide the mattress base
(part 8) into the grooves on the crib sides (part 7) so that the base
support end meets the crib end.
PLEASE PLACE THE MATTRESS BASE IN THE CORRECT POSITION, SO THAT THE
TWO SAFETY LABELS ARE FACING UPWARDS
support end (part 9) onto the other end/top end of the mattress base.
nd
Attach the 2
bolts (part A)
.
FULLY ENGAGED INTO GROOVES BEFORE TIGHTENING)
crib end (part 2) onto the crib sides by using 4 x large
As in (figure 2)
Attach the other base
PLEASE
ENSURE THAT THE BASE IS
3
.