Advertisement
Quick Links
Saplings Gracie swinging crib
Assembly instructions
Components – parts
Crib feetX
2
1
Swinging arms
without locking
4b
bolt holes
x2
If you need help or have missing or damaged parts, call the customer helpline:
– please keep for future reference
2
CRIB ENDS X 2
Swinging arm side
6
bars
x2
Crib base end
9
supports x2
01952 550022
3
CENTRE CROSS BAR X 1
7
CRIB SIDES X 2
1
Swinging arms
4a
with locking bolt
holes
x2
8
BASE BOARD X 1
Advertisement
Summary of Contents for Sapling Gracie swinging crib
- Page 1 Saplings Gracie swinging crib Assembly instructions – please keep for future reference Components – parts Swinging arms with locking bolt CENTRE CROSS BAR X 1 Crib feetX CRIB ENDS X 2 holes Swinging arms without locking Swinging arm side bolt holes...
- Page 2 Components–fittings please check all fittings are present PRESENT BEFORE ASSEM Assembly instructions Stage 1 assembly of the feet Push metal sleeves (part D) x8 onto mechanisms on bottom of crib end part 2 and top of crib feet part 1 Attach the crib feet ends (part 1) to the cross bar (part 3) by placing the large barrel nuts (E) into the large holes provided and attach with 2 x large bolts (A).
- Page 3 Assembly instructions Figure 1 Stage 3 assembling of the crib body Place 1 x crib end (part 2) on the floor with the screw inserts holes facing upwards. Loosely attach 2 x crib sides (part 7) to the crib end (part 2) using 4 x large bolts (part A).
- Page 4 Assembly instructions Figure 2 Stage 4 attaching the crib body to the feet Stage attaching the crib body to the feet Place the crib frame over the crib stand resting it on top. Secure the crib by placing 4 x small bolts (part B) through the swinging arms (parts 4a &...
- Page 5 Safety and care advice Ensure that the Crib is used on a horizontal floor. Do not allow children to play unsupervised in the vicinity of the Crib WARNING: Ensure the Crib is in the locked position when leaving a child unsupervised in it ...