Yamaha DPX-1200 Owner's Manual page 63

Digital cinema projector
Hide thumbs Also See for DPX-1200:
Table of Contents

Advertisement

Problem
COVER warning
The filter cover is not correctly attached.
indicator lights up.
The lamp cover is not correctly attached.
LAMP warning
Lamp running time has exceeded 2000
indicator lights up or
hours.
blinks.
The lamp has burned out.
TEMP warning indicator
The temperature inside the DPX-1200 is
lights up.
extremely high.
FAN warning indicator
The fan is broken.
lights up.
This unit uses a DMD
TM
chip for the picture display. Their highly accurate technology makes it possible to keep more than 99.99% of
effective pixels, however, unexpectedly it can produce less than 0.01% of ineffective pixels. In such a case, missing or flashing of a
few pixels can be found on the screen. These are characteristics of DMD
Cause
TM
, not mechanical problems.
Troubleshooting
Remedy
Tightly attach the filter cover.
Tightly attach the lamp cover.
Replace the lamp with a new one.
Replace the lamp with a new one.
Check that the ventilation slots are not
covered.
Contact the store where the DPX-1200 was
purchased.
11
59

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents