Yamaha DPX-1200 Owner's Manual page 31

Color Adjustment
(Input signal)
Video/S-Video/Component/
RGB TV/RGB PC/D4 VIDEO
White Peaking
Iris
(Input signal)
Video/S-Video/Component/RGB TV/RGB PC
Level Adjustment
(Input signal)
Component/RGB TV/RGB PC
Adjusts color balance.
There are three menus, [Standard], [WRGB], and [WRGBYCM], separated in order of
complexity from simple to detailed. By the default setting, the DPX-1200 automatically
selects BT709 (RGB color coordinate for High-Definition Television) for HDTV (High-
Definition Television) or PC video input and BT601 (RGB color coordinate for Standard
Television) for SDTV (Standard Television) input. Refer to page 36 for parameter operation
methods.
The present color temperature setting is displayed to the right of the menu items.
Color Adjustment Standard
- Standard
Adjusts color temperature and hUV only.
hUV adjusts values within the maximum
color temperature limits of the projector.
- WRGB
Adjusts the color coordinates and gain for
the three primary colors, R(Red), G(Green),
and B(Blue). The unit sets the complemental
colors Y(Yellow), C(Cyan), and M(Magenta)
automatically. Adjusting [Color Temp.] resets
the RGB gain based on color coordinate
settings. Adjusting [Gain] resets [Color temp.]
based on color coordinate settings.
- WRGBYCM
Adjusts the color coordinates and gain for
each component color individually. Press
the RESET button on the remote control
when the WRGBYCM menu is open to
automatically adjust the RGB gain and
YCM color coordinates and gain based on
the color temperature and RGB color
settings. When you have selected
WRGBYCM in the color adjustment
submenu, press RESET to automatically
adjust the RGB gain and YCM color
balance to the most appropriate setting,
based on color temp and RGB color
balance settings.
Choices: White correction : -0.02 to +0.02
Color temperature : 5,000 to 10,000
Gain : 0.00 to 1.99
Enhances the brilliance of the white portions of the projected image.
Choices: 0 to 5
Adjusts the iris (Optical).
You can select 3 levels.
Close
Adjusts the analog input signal gain and offset settings.
Adjust the gain and offset for component and RGB (Y, C
Choices: -50 to 0 to +50 (except for HDMI signals)
The current color temperature is displayed.
6700K + 0.000uv
-
y
0.5
0.0
0.0 0.5
y
0.5
0.0
0.0 0.5
y
0.5
0.0
0.0 0.5
Open
, C /R, G, B) input signals.
B R
Menu items
W (Color temperature
and h UV)
x
G (Green)
W (Color temperature
and h UV)
R (Red)
B (Blue)
x
G (Green)
Y (Yelow)
C (Cyan)
W (Color temperature
and h UV)
R (Red)
M (Magenta)
x
B (Blue)
27
7