Ozito POWER XCHANGE PXCBLLTC-318 Instruction Manual
Ozito POWER XCHANGE PXCBLLTC-318 Instruction Manual

Ozito POWER XCHANGE PXCBLLTC-318 Instruction Manual

Cordless grass trimmer

Advertisement

Quick Links

CORDLESS
GRASS TRIMMER
INSTRUCTION MANUAL
SPECIFICATIONS
Voltage:
18V
Battery:
3.0Ah Li-ion
Charge Time:
60 min
No Load Speed:
8,500/min
Cutting Diameter:
240mm
Weight:
2.45kg
ozito.com.au
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST
RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS WAREHOUSE
WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO RETURNING
YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE OUR CUSTOMER
SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
WARNING
The following actions will result in the warranty being
void.
• If the tool has been operated on a supply voltage other
than that specified on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
OZITO
Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
WARRANTY
The benefits provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major failure and for
compensation for any other reasonably foreseeable loss or damage. You are also
entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the failure does not
amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer service helpline
above.
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty. Warranty excludes consumable parts, for example: cutting blades.
WHAT'S IN THE BOX
Grass Trimmer
Blades x 10
Cordless Blower
3.0Ah Battery & Fast Charger
PXCBLLTC-318
0317

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the POWER XCHANGE PXCBLLTC-318 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Ozito POWER XCHANGE PXCBLLTC-318

  • Page 1 No Load Speed: 8,500/min Cutting Diameter: 240mm Weight: 2.45kg ozito.com.au 3.0Ah Battery & Fast Charger PXCBLLTC-318 WARRANTY IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST The benefits provided under this warranty are in addition to other rights and remedies which are available to you at law.
  • Page 2: Know Your Product

    KNOW YOUR PRODUCT SETUP & PREPARATION CORDLESS GRASS TRIMMER 1. ASSEMBLY 1. Telescopic Shaft 8. Battery Seating 2. Shaft Adjustment Collar 9. Head Tilt Button WARNING! ENSURE THE TOOL IS SWITCHED 3. Adjustable Handle Lever 10. Edging Guide OFF AND BATTERY DISCONNECTED BEFORE PERFORMING ANY OF THE FOLLOWING TASKS.
  • Page 3: Adjusting The Trimmer

    2. ADJUSTING THE TRIMMER Adjusting the Height Adjusting the Handle 1. Loosen the shaft adjustment 1. Release the adjustable handle collar. lever. 2. Extend to the desired 2. Rotate the handle into height and then the desired position and retighten the shaft then lock in place with adjustment collar to the lever.
  • Page 4: Battery And Charging

    3. BATTERY & CHARGING Battery Charge Indicator CAUTION: THE CHARGER FOR THIS PRODUCT The purchased battery is equipped with a SHOULD BE PROTECTED BY A RESIDUAL CURRENT battery charge indicator to show the state of DEVICE (RATED AT 30MA OR LESS). the battery charge.
  • Page 5: Controls And Operation

    OPERATION 4. CONTROLS & OPERATION Inserting & Removing the Battery Using the Grass Trimmer WARNING! INSPECT THE AREA TO BE TRIMMED 1. Align the ribs of the battery with AND REMOVE ANY WIRE, CORD OR STRING-LIKE the recess in below the handle OBJECTS WHICH COULD BECOME ENTANGLED IN and slide in until it clicks into THE ROTATING BLADE.
  • Page 6: Maintenance

    Place the edging guide along the ground and slide the grass trimmer along the edge Note: Ozito Industries will not be responsible for any damage or injuries caused by the repair of of the path. the grass trimmer by an unauthorised person or by mishandling of the grass trimmer. This tool is...
  • Page 7: Troubleshooting

    Spare parts can be ordered from the Special Orders Desk at your local Bunnings Warehouse. Decibel level For further information, or any parts not listed here, visit www.ozito.com.au or contact Ozito Customer Service: Australia 1800 069 486 New Zealand 0508 069 486 E-mail: enquiries@ozito.com.au...
  • Page 8: Electrical Safety

    Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand. The power supply for this products charger should be protected by a residual current device (rated at 30mA This tools charger is double insulated therefore no earth wire is required.
  • Page 9: Warranty

    12,000/min Blades x 10 Max. Air Speed: 210km/hr Weight: 2.0kg ozito.com.au 3.0Ah Battery & Fast Charger PXCBLLTC-318 WARRANTY IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST The benefits provided under this warranty are in addition to other rights and remedies which are available to you at law.
  • Page 10 KNOW YOUR PRODUCT SETUP & PREPARATION CORDLESS BLOWER 1. ASSEMBLY 1. Blow Tube 4. Trigger Switch 2. Blow Tube Release Tab 5. Battery Seating WARNING! ENSURE ThE TOOL IS SWITChED OFF AND BATTERY DISCONNECTED BEFORE 3. Sure Grip Handle PERFORMING ANY OF ThE FOLLOWING TASkS. Fitting the Blower Tube 1.
  • Page 11 2. BATTERY & ChARGING Battery Charge Indicator CAUTION: ThE ChARGER FOR ThIS PRODUCT ShOULD BE PROTECTED BY A RESIDUAL CURRENT The purchased battery is equipped with a DEvICE (RATED AT 30MA OR LESS). battery charge indicator to show the state of the battery charge.
  • Page 12 OPERATION 3. INSERTING & REMOvING ThE BATTERY 4. CONTROLS & OPERATION Inserting the Battery into the Blower WARNING!: DO NOT USE ThE BLOWER WITh ANY TYPE OF ACCESSORY OR ATTAChMENT. SUCh 1. Align the ribs of the battery with USAGE MIGhT BE hAZARDOUS. the recess in below the handle.
  • Page 13 DO NOT store or use the tool and battery pack in locations where the temperature may reach or exceed 40ºC (such as inside Note: Ozito Industries will not be responsible for any damage or injuries caused by the repair of the sheds or metal buildings in summer).
  • Page 14 Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand. The power supply for this products charger should be protected by a residual current device (rated at 30mA This tools charger is double insulated therefore no earth wire is required.

Table of Contents