Step 3 Make Sure That The Crw-70 Drive Is Correctly Recognized - Yamaha CD Recordable/Rewritable Drive CRW-70 Owner's Manual

Using the CRW-70 Drive as a CD-R/RW Drive (When Connected to a Computer)
For Windows Me/2000 Professional/XP
Windows Me, 2000 Professional or XP automatically installs the standard
device drivers.
Note
The device driver needs to be installed for each USB port. If you connect the CRW-
70 drive to a USB port for which the device driver has not yet been installed, a
message will appear prompting you to install the device driver again.
3 Make Sure that the CRW-70 Drive Is Correctly Recognized
STEP
After connecting the CRW-70 drive to your computer, check to be sure that
the drive is correctly recognized by the operating system.
For Windows 98 Second Edition/Me
Click Start on the taskbar, select Setting, Control Panel and System, and
click the Device Manager tab to open the Device Manager window.
Note
For Windows Me, if the System icon is not found in the Control Panel window,
click "view all Control Panel options" on the left side of the window.
Screen 1
Make sure that "YAMAHA CRW-70" (Screen 1), "USB CD-ROM," and
"USB Mass Storage Device" (Screen 2) are displayed as shown above.
22
Screen 2 (Scroll down the list)
* These screens are examples on Windows Me.