Loading/Removing a Disc
You cannot load or eject a disc when the CRW-70 drive is turned off.
Loading a Disc
1 1 1 1
Press the eject button.
The top cover opens. If it does not fully open, lift it up manually.
Note
Do not try to force the top cover open by hand. Doing so can damage the
CRW-70 drive and the disc.
2 2 2 2
Load the disc.
Press the center of the disc onto the CRW-70 drive spindle until it clicks
into place. Do not use excessive force or touch the pickup.
Label facing upward
3 3 3 3
Close the top cover.
Press here
Press here
Pickup
15