Yamaha YDP-131 Owner's Manual page 36

7.
Connect the AC power adaptor.
WARNING
Use the specified adaptor (PA-5D or an equiva-
lent recommended by Yamaha) only.
After completing the assembly, please
check the following.
• Are there any parts left over?
➝ Review the assembly procedure and correct any
errors.
• Is this instrument clear of doors and other mov-
able fixtures?
➝ Move the instrument to an appropriate location.
• Does this instrument make a rattling noise
when you shake it?
➝ Tighten all screws.
• Does the pedal box rattle or give way when you
step on the pedals?
➝ Turn the adjuster so that it is set firmly against
the floor.
• Are the pedal cord and adaptor plug inserted
securely into the sockets?
➝ Check the connection.
• If the main unit creaks or is otherwise unsteady
when you play on the keyboard, refer to the
assembly diagrams and retighten all screws.
36 Keyboard Stand Assembly
YDP-131/YDP-213
8.
Set the adjuster.
Rotate the adjuster until it comes in firm contact with the
floor surface.
When moving the instrument after assembly, always
hold the bottom of the main unit.
CAUTION
Do not hold the key cover or top portion. Improper
handling can result in damage to the instrument or
personal injury.
Key cover
Do not
hold here.
Hold here.
Top portion
Do not hold here.