Troubleshooting - Samsung HW-K950 User Manual

Hide thumbs Also See for HW-K950:
Table of Contents

Advertisement

Available languages

Available languages

TROUBLESHOOTING

Before seeking assistance, check the following.
The unit will not turn on.
Is the power cord plugged into the outlet?
È Connect the power plug to the outlet.
A function does not work when the button is
pressed.
Is there static electricity in the air?
È Disconnect the power plug and connect it again.
Sound is not produced.
Is the Mute function on?
È Press the VOL button to cancel the function.
Is the volume set to minimum?
È Adjust the Volume.
The remote control does not work.
Are the batteries drained?
È Replace with new batteries.
Is the distance between the remote control and
Soundbar main unit too far?
È Move the remote control closer to the Soundbar
main unit.
The red LED on the subwoofer blinks and the
subwoofer is not producing sound.
This issue can occur if the subwoofer is not
connected to the Soundbar main unit.
È Try to connect your subwoofer again.
See page 6.
The subwoofer drones and vibrates noticeably.
Try to adjust the vibration of your subwoofer.
È Push the WOOFER button on your remote
control up or down to adjust its value (between
-12, -6 ~ +6).
LICENCE
Manufactured under licence from Dolby
Laboratories. Dolby, Dolby Atmos, Dolby Audio,
Dolby Digital Plus, Pro Logic, and the double-D
symbol are trademarks of Dolby Laboratories.
For DTS patents, see http://patents.dts.com.
Manufactured under licence from DTS Licencing
Limited. DTS, the Symbol, DTS in combination with
the Symbol, and DTS Digital Surround are
registered trademarks or trademarks of DTS, Inc. in
the United States and/or other countries. © DTS,
Inc. All Rights Reserved.
The terms HDMI and HDMI High-Definition
Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI
Licencing LLC in the United States and other
countries.
· 21 · English

Advertisement

Table of Contents
loading

Table of Contents