Error Messages - Yamaha QY22 Owner's Manual

11
Appendix
Error Messages ——————————————————————————
Errors do occur from time to time, and when they do the QY22 will usually display a message that indicates
what type of problem has occurred so you can rectify it and return to normal operation as quickly as possible.
Illegal Input
This error appears if you attempt to enter a value
that is out of range or otherwise unacceptable in the
current situation.
Memory Full
The QY22 memory is full or almost full and the
specified operation cannot be performed. Delete
unwanted song and/or pattern data to make more
memory available.
Battery Low
The battery voltage is too low for proper opera-
tion. The sound may also become distorted when
this display appears. Replace the old batteries with
a set of new ones as soon as possible. Internal data
will be retained while the batteries are replaced.
Backup Batt. Low
Appears when the power is turned on if the inter-
nal memory backup battery is too low to maintain
the internal memory data. Have the backup battery
replaced by qualified Yamaha service personnel.
186
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
Now Working
This error may appear if a data error is detected
when the QY22 power is turned on. The "Now Work-
ing" display indicates that the data is being repaired
... wait a few moments until the error message dis-
appears.
Preset Pattern
Since the preset patterns cannot be changed in
any way, this error message will appear if you at-
tempt to execute any operation that is intended to
alter the pattern data while a preset pattern is se-
lected.
Repeat Exist
This error message will appear if you copy a
chord part using the song job copy measure function
while one or more repeats exist in the accompani-
ment tracks. Delete all repeats in the step record
mode and then execute the copy measure function
as required.