Yamaha PortaTone PSR-550 Owner's Manual page 85

8
Press the [NEXT] button to display the Punch In/Out screen.
9
Select "On".
Use the data dial, the [+/YES] button or the [-/NO] button.
10
Press the [NEXT] button to display the Punch In measure
screen.
11
Set the punch-in measure.
Use the data dial, the [+/YES] button, the [-/NO] button or the number buttons
[1]-[0].
12
Press the [NEXT] button to display the Punch Out measure
screen.
13
Set the punch-out measure.
Use the data dial, the [+/YES] button, the [-/NO] button or the number buttons
[1]-[0].
14
Press the [NEXT] button to display the START MEASURE
screen.
15
Set the start measure (the measure at which playback starts).
Use the data dial, the [+/YES] button, the [-/NO] button or the number buttons
[1]-[0].
16
Press the [NEXT] button to display the PART screen.
17
Record using the same operation as described in "Multi Track
Recording" on page 82, starting with step #7.
Song Recording
• The punch-out measure
number cannot be set lower
than the punch-in measure
number.
• Punch In/Out recording
cannot be used with the auto
accompaniment tracks.
• During recording you can
use the TRACK buttons to
turn playback of previously-
recorded tracks on or off as
required.
85