Table of Contents
Advertisement
Using Floppy Disks
1
Select the DELETE Job
Press the [JOB SELECT] button to the right of the display as many
times as necessary until the arrowhead in the display appears next to "DE-
LETE" in the disk job list to the right of the display.
2
Select the File to Be Deleted
Select a file number to be deleted by using the [–/NO] and [+/YES] but-
tons, the number buttons or the data dial. If the selected file can be deleted,
the [EXECUTE] indicator will flash.
3
Execute the Delete Operation
Press the [EXECUTE] button. "Sure?" will appear on the display. Press
the [+/YES] button to delete the selected file or [–/NO] button to cancel the
delete operation.
"Deleting" will appear on the display for a few seconds while the data is
being deleted. When the data has been deleted, the [EXECUTE] indicator
will go out.
170
72
Deleting a Disk File
..................................................................................................................
LOAD
SAVE
DELETE
JOB
SELECT
FORMAT
EXECUTE
QUIT
DISK
...............................................................................................
...........................................................................................
JOB
SELECT
EXECUTE
QUIT
DISK
• The delete operation can be
• Never remove the disk or turn the
7
8
9
+
0
–/NO
/ YES
canceled by pressing the [QUIT]
button while the [EXECUTE]
indicator is flashing.
power OFF while the "Deleting"
display is showing.
Advertisement
Table of Contents
