Pattfield Ergo Tools BASIC PE-ALB 18 Li Translation Of The Original Instructions page 201

4. Usage and treatment of the electric tool
a) Do not overload the appliance. Use the correct tool for your
work. You will be able to work better and more safely within the
given performance boundaries.
b) Do not use an electric tool with a defective switch. An electric
tool that cannot be switched on or off is dangerous and must be
repaired.
c) Pull the plug out of the socket and/or remove the battery be-
fore making any adjustments to the appliance, changing ac-
cessories or putting the appliance down. This safety measure
prevents starting the electric tool unintentionally.
d) Keep unused electric tools out of the reach of children. Do
not allow people who are not familiar with the appliance or
who have not read these instructions to use the appliance.
Electric tools are dangerous if they are used by inexperienced
people.
e) Clean your electric tool carefully. Check whether moving
parts are functioning properly and not jamming, whether
parts are broken or damaged enough that the functioning of
this electric tool is aff ected. Have damaged parts repaired
before using the appliance. Many accidents are caused by
badly maintained electric tools.
f) Keep your cutting tools sharp and clean. Carefully maintained
cutting tools with sharp cutting edges will jam less and are easier
to control.
g) Make sure to use electric tools, accessories, attachments,
etc. in accordance with these instructions. Take the condi-
tions in your work area and the job in hand into account.
Using electric tools for any purpose other than the one for which
they are intended can lead to dangerous situations.
Anl_PE_ALB_18_Li_Basic_SPK7.indb 201 Anl_PE_ALB_18_Li_Basic_SPK7.indb 201
- 201 -
GB
21.01.16 16:02 21.01.16 16:02