Step 4: Set Up The Appliance Using The Quick Setup Wizard - Kaseya Unitrends Recovery Series Quick Start Manual

Quick Start Guide for Recovery Series
Appliances
Release 10.4.8 | October 2020
Step 4: Set up the appliance using the Quick Setup Wizard
To start the setup process, you will log in to the appliance UI from any machine on the same network by opening a
browser and entering the appliance's IP address followed by /ui/. The Quick Setup Wizard launches when you access
the UI for the first time.
To set up the appliance
1 Open a browser and connect to your appliance by entering: https://<applianceIP>/ui. For example:
https://10.10.10.1/ui.
2 Click Accept to accept the license agreement.
3 Set the appliance date and time by doing one of the following, then click Next:
•
Select a Timezone. If needed, modify the appliance Date and Time.
OR
•
Check the Use an NTP Server box to sync to an NTP server. (Optional) Enter your preferred NTP server address.
Quick Start Guide for Recovery Series Appliances
13