Huawei OceanStor Dorado2100 G2 Quick Installation Manual page 8

4
Connecting the Storage System to a Network
 The controller enclosure is connected to the application server through FC host ports (8 Gbit/s), TOE
host ports (10 Gbit/s), or IB host ports (40 Gbit/s).
 A management channel can be set up by connecting the management network port on the controller
enclosure to the network port on the maintenance terminal using a network cable so that the
maintenance terminal can manage and maintain the storage device.
For details about each port and the cable connected to it, see the OceanStor Dorado2100 G2 Storage
System Installation Guide.
5
Connecting the Serial Port to the Maintenance Terminal
 After connecting the serial port to the maintenance terminal using a serial cable, you can manage
and maintain the storage system through the serial port.
 Normally, the serial cable is an RJ-45 to DB-9 serial cable.
For details on how to connect a serial port, see the OceanStor Dorado2100 G2 Storage System Installation
Guide.
8