Advertisement
3.Connect the Spin parts(B1)with the Connect steel plate by tightening screw b1(M8*65),
and assemble the bigger pin again as below show.
4.Connect the assembled parts by last step with the finished Platform,climbing ladder
parts together,connect the Top Bar B(A2)with shrink end together with the Connection
tube(four-way)A15 by tightening screw a1(M8*50), then connect the Top Bar C(A3) with
the finished Climbing webbing parts together by tightening the screw a1(M8*50),then all
the Top bar will be finished connecting as below show.
Attention!Pay attention to direction of the Top Bar C(A3),the end of the through-hole
next to the Spin parts.
3
2
1
b1
a1
B2
B1
a1
A3
20
Advertisement
