Advertisement
6.Connect the 2 pcs Support Bar C(A10) with the Climbing webbing(A21) by going
through the two holes as below show,and connect with Support Bar B(A6) by tightening
screw a4(M8*52),connect with Support Bar A by tightening screw a3 （M8*56).
A6
a4
A6
7.Connect the Protect Net(A18) with Support Bar B(A9) by the touch fasteners,at the
same time. Also connect the Protect Net(A18) with the Support Bar B(A9) by touch
fasteners.
A6
A10
A10
A18
A9
A6
18
A5
a3
Advertisement
