Download
Share
Print this page
  1. Manuals
  2. Brands
  3. KMART Manuals
  4. Play Sets & Playground Equipment
  5. 42949503
  6. Instruction manual

KMART 42949503 Instruction Manual

Platform spin swing set
Hide thumbs

Advertisement

Quick Links

Download this manual
Platform Spin Swing Set
Instruction Manual
Keycode 42949503
WARNING!
Not suitable for children under 3 years. Small parts. Choking hazard.
Maximum user weight 45kg for each section. This unit is designed to be used
safely by up to 5 children simultaneously. Only for domestic use. Outdoor use
only.

Advertisement

loading

Related Manuals for KMART 42949503

Summary of Contents for KMART 42949503

  • Page 1 Platform Spin Swing Set Instruction Manual Keycode 42949503 WARNING! Not suitable for children under 3 years. Small parts. Choking hazard. Maximum user weight 45kg for each section. This unit is designed to be used safely by up to 5 children simultaneously. Only for domestic use. Outdoor use...
  • Page 2 swing swing set instruction This swing set complies with AS/NZS ISO 8124.6.
  • Page 3 Maximum weight of 100 pounds(45kg) for swing section. Unexpected movement (i.e.: tipping, lifting and overturning) of the swing set may result in serious injury or death. The swing set must be securely anchored before use. The owner should disassemble and dispose of the playground equipment in such a way that no unreasonable hazards will exist at the time the playground equipment is discarded.
  • Page 4 Proper Play Conditions: Always use the product in a well-lit area. Do not use without lighting during dawn, dusk or in complete darkness! Maintain clear space on all sides of the product. Such objects include walls, fences, tree limbs/trunks, electrical power wiring, rocks, sp rinkler heads or other recreational objects (i.e. swing sets, swimming pools).

  • Page 5: Safety Notes

    SAFETY NOTES: Adult assembly required. Adult supervision required when product in use. For domestic outdoor use Children must understand how to use the product safely. DO NOT allow children to play around product when in use DO NOT allow more than 1 child to use this product at a time. Do not use the mat when it is wet.

  • Page 6: Specifications

    Specifications This swing set is designed for use by children ages 3-8 years old with a maximum weight of 45kg for each section. fall ” This product is designed for normal residential use only. This product is not designed for use in day care, nurseries, or other public places.
  • Page 7 Location and Placement of Your Swing Set Proper placement and maintenance of protective surfacing is essen tial. Be sure to: • Extend surfacing at least 6 feet (1.83m) from the equipment in all directions. Swing set must be placed a minimum of 6 feet (1.83m) from any structure or obstruction such as a fence, garage, house, overhanging branches, laundry lines, or electrical wires.
  • Page 8 Picture Description Top Bar A Top Bar B Top Bar C Top Bar D Leg A 2PCS Leg B Leg C 4PCS Support Bar A 2PCS Support Bar B 1PCS Support Bar C 2PCS Climbing tube 6PCS Rectangular 2PCS tube A Rectangular 2PCS tube B...
  • Page 9 Picture Description Platform fabric Rectangular Platform fabric Protect Net Tent fabric Sandpit fabric Climbing webbing...
  • Page 10 Picture Description M10*50（pre-assembled) 14st 18st M8*50（pre-assembled) M8*56（pre-assembled) M8*52（pre-assembled) M8*70 Anchor 7pcs...
  • Page 11 Picture Description Spin parts Connect steel plate M8*75 M10*30（2PC） U screw Nest swing Top rail 4PCS Nest swing set Nest swing rope M10*30（2PC） U screw（pre-assembled) Nut with washer （pre-assembled)
  • Page 12 Platform, Climbing Ladder and Sandpit Assembly Part 1.Connect the Top Bar D (A4) with the Connection tube (three-way) A14, and connect the other end with the Connection tube(four-way) A15,tighten them with the screw a1(M10*50)
  • Page 13 2.Connect 4pcs Leg C(A7) with Connection tube (three-way)A14 and Connection tube(four-way)A15, tighten them with screw a2(M8*50). 3.Put the Rectangular A(A12) go through the two longer tunnels of the Rectangular Platform fabric(A17),and connect with Leg C(A7) by tightening screw a5(M8*70).
  • Page 14 4.Connect the 6pcs climbing tube(A11) with Leg C(A7), two of the climbing tube (A11) need to go through the Rectangular Platform fabric (A17), tighten them with screw a2(M8*50) as below picture show. 5.Put the Sandpit fabric(A20) at the bottom, two Rectangular tube B(A13) go through the Sandpit fabric (A20) from the two sides as below show, and use the screw a5(M8*70) to tighten them.
  • Page 15 6.Open the Tent fabric(A19),the finished part go through the tunnel of it, then tighten the touch fastener one by one as below picture show.
  • Page 16 Climbing webbing assembly part 1.Put the Top Bar A(A1) go through the top hole of the Climbing webbing(A 21),then connect the Top bar A(A1)with the Connection tube(four-way)A15 by tightening the screw a1(M10*50) as below picture show.
  • Page 17 2.Put the Leg A(A5) go through the shorter end of the Climbing webbing(A21), then connect with the Top Bar A(A1) by tightening the screw a1(M10*50) as below show. 3.Put one of the Leg B(A6) go through the 4 holes of the Climbing webbing(A21) top end, the other one go through the 2 holes of the Climbing webbing(A21) low end, then connect these two Leg B(A6) with the Connection tube(four-way)A15 by tightening the screw a2(M8*50) as below picture show.
  • Page 18 4.Put 2 Support Bar A(A8) go through the Platform fabric(A16), at the same time, one of the Support Bar A(A8) need to go through the two holes of the low section Climbing webbing(A21), the Support Bar B(A9) need to go through the other side of the Platform facric(A16) as below picture show.
  • Page 19 6.Connect the 2 pcs Support Bar C(A10) with the Climbing webbing(A21) by going through the two holes as below show,and connect with Support Bar B(A6) by tightening screw a4(M8*52),connect with Support Bar A by tightening screw a3 （M8*56). 7.Connect the Protect Net(A18) with Support Bar B(A9) by the touch fasteners,at the same time.
  • Page 20 Spin Parts and Nest swing set assembly parts 1.Take down the bigger Pin from the assembled spin parts(B1). 2.Assemble the U screw(b2)on the Top Bar B(A2) which has slot, and put the Connect steel plate (B2) under the Top Bar B(A2) accordingly,then connect them together as below shows (Attention! The direction of the Top Bar B,there are 5 holes in the top and 6 holes in the bottom).
  • Page 21 3.Connect the Spin parts(B1)with the Connect steel plate by tightening screw b1(M8*65), and assemble the bigger pin again as below show. 4.Connect the assembled parts by last step with the finished Platform,climbing ladder parts together,connect the Top Bar B(A2)with shrink end together with the Connection tube(four-way)A15 by tightening screw a1(M8*50), then connect the Top Bar C(A3) with the finished Climbing webbing parts together by tightening the screw a1(M8*50),then all the Top bar will be finished connecting as below show.
  • Page 22 6.Put the Nest swing Top tail (C1)go through the tunnel of the Nest swing set(C2) as below show...
  • Page 23 8.Assemble the Nest swing Top rail(C1 ) by tightening the screw on the Nest swing rope(C3) and the Nut with washer(C2). 9.Assemble the finished Nest swing set on the Top Bar by tightening the U screw(M10*30)c1...
  • Page 24 Anchor Assembly part Connect the anchor (a6)through the hole on the Leg and insert it into the ground as below picture show.
  • Page 25 Spin Part Instructions 1.Take down the bigger Pin(Spin part can swing back and forth) 2.Take down the smaller Pin(Spin part can swing 360 degrees ) ATTENTION!CAN NOT TAKE DOWN THESE TWO PINS AT THE SAME TIME!
  • Page 26 Information on Playground Surfacing Materials Select Protective Surfacing One of the most important things you can do to reduce the likelihood of serious head injuries is to install shock-absorbing protective surfacing under and around your play equipment. The protective surfacing should be applied to a depth that is suitable for the equipment height in accordance with ASTM Specification F1292.
  • Page 27 Review surface specifications before purchasing this type of surfacing. Ask the installer/manufacturer for a report showing that the product has been tested to the following safety standard: ASTM F1292 Standard Specification for Impact Attenuation of Surfacing Materials within the Use Zone of Playground Equipment. This report should show the specific height for which the surface is intended to protect against serious head injury.