Turning The Disklavier On - Yamaha Mark IV Operating Manual

Turning the Disklavier On

Confirm that the power cable of the Power Supply unit
1
is connected to an AC wall outlet.
2 Press the [ON] side of the [POWER] switch on the
Monitor speakers. (
Manual")
Note:
This step is necessary only for models supplied with the Monitor
speakers.
3 Press the [ON] side of the [MAINS] switch on the Power
Supply unit. (
Manual")
4 Press the [ON] side of the [MAINS] switch on the I/O
Center. (
on the Media Center starts flashing green.
Wait until
then go to step 5.
Note:
It may take several minutes.
pg. 10 in "Advanced Operating
pg. 5 in "Advanced Operating
pg. 4 in "Advanced Operating Manual")
on the Media Center stops flashing and dimly lights green, and
Continue to next page . . .
Chapter 2: Basic Operations
9